Hansen ThermoSpan Finishes

The Hub

Standard Glass Prints

Micropoint 4 - 4mm printed points in a 5 spot pattern at 6.4mm centres giving 31% cover.
Micropoint 6 - 6mm printed points in a 5 spot pattern at 6.4mm centres giving 39% cover.

Micropoint Contour 4 - 4mm clear points in a 5 spot pattern at 6.4mm centres on a printed background giving 69% cover.
Micropoint Contour 6 - 6mm clear points in a 5 spot pattern at 6.4mm centres on a printed background giving 61% cover.

Microline 5/5 and Microline 10/10 - 5mm printed lines with 5mm gaps, or 10mm with 10mm gaps, both giving 50% cover.

Microline 10/5 and Microline 5/10 - 10mm printed lines with 5mm gaps giving 67% cover, or 5mm with 10mm gaps giving 330% cover.

Glass Fittings

All bracketry is manufactured from stainless steel type 316 and can be provided in satin, bright and electropolished finishes. In addition to the standard range of bracketry offered HansenThermoSpan can accommodate clients’ specific bracketry designs with full engineering calculations and testing.

Supporting bracketry can be used with all ThermoSpanTM glass products.

Aspect Normal

Manufactured from 80mm x 80mm stainless steel angle section the bracketry is drilled and machined to suit fixing requirements of the ThermoSpanTM bolts and the clients fixings back to the building structure. The bracket can be finished in a No.4 satin finish or a No.8 polished finish.

Aspect Profile

Also manufactured from 80mm x 80mm stainless steel angle section the bracketry is then profiled prior to drilling and polishing. The bracket can be finished in a No.4 satin finish or a No.8 polished finish.

Morphic Bespoke Bracket

Produced through the investment casting technique from stainless steel, the Morphic range of brackets is ever changing to meet our clients’ requirements. HansenThermoSpan will assist the client with their design and produce drawing details and working models of the finalised bracket design. The Morphic bracket has an original backplate design that allows for ease of installation whilst giving additional movement to accommodate interfacing tolerances.

Hooke:Pin Bracket

The Hooke bracket range offers a minimalist appearance with the inherent strength of stainless steel. A unique assembly method allows this bracket to be used with all ThermoSpanTM glass products.